M12 female 0° A-cod. with cable 7000-12221-2141000 MURR ELEKTRONIK
Product Overview

The 7000-12221-2141000 is a 10-meter, straight (0°) female M12 A-coded connector cable with four conductors and open (flying) wire ends. It is designed for signal/sensor applications, offering industrial connectivity with reliability, flexibility, and ease of termination.
The cable is built to suit automation environments where sensors or devices equipped with M12 connectors must be wired into control systems or junction points.

Key Technical Specifications & Features

Engineering Insights & Best Practices

• Flexible Termination: The open wire end allows the cable to be directly connected into terminal blocks, pluggable connectors, or other wiring systems without needing a second connector.

• Reliable Contact Quality: Gold-plated contacts and proper torque (0.6 Nm) ensure low contact resistances and durability over repeated insertions. Over- or under-tightening can jeopardize sealing or contact reliability.

• Environmental Resilience: With IP65/IP66K/IP67 rating when properly mated, the cable is suitable for dusty and wet industrial settings—though care must be taken regarding bending radius and mechanical stresses.

• Electrical Design Considerations: The 0.34 mm² conductor is typical for signal-level currents; for longer runs or higher loads, voltage drop or heating should be assessed.

• Mechanical Stress Handling: Strain relief, securing the cable near the connector, and avoiding sharp bends will prolong life and maintain sealing integrity.

Suggested Product Page Description

Murrelektronik 7000-12221-2141000 — 10 m Straight M12 Female (A-Cod.) Signal Cable, 4-Wire PVC

This durable, industrial-grade cable assembly features a straight M12 A-coded female connector on one end and four open (flying) wire leads on the other. With a generous 10 m length, 0.34 mm² conductors, and gold-plated contacts, it simplifies integration of sensors or devices into control systems. Rated for up to 4 A per contact and offering IP65/66K/67 protection when properly installed, it’s a dependable choice for factory floor signal wiring.

Key Highlights

• 10 m length with open-ended 4-wire termination

• Straight (0°) M12 A-coded female connector

• 4 A per contact capability, up to 250 V rating

• PVC jacket, gold-plated contacts, IP65–67 protection

• Appropriate for –30 °C to +85 °C environments

• Ideal for sensor or signal wiring requiring clean integration