DUS60E-TEKFAACA 1093333 Incremental encoders: DUS60 SICK Products Motion control sensors Incremental encoders > Motion control sensors > Incremental encoders > DUS60 > DUS60E-TEKFAACA CE|cULus|RCM|UKCA
| MTTFD (mean time to dangerous failure) | 275 years (EN ISO 13849-1) 1) |
|---|---|
| Measuring step | 90°, electric/pulses per revolution |
| Measuring step deviation | ± 18° / pulses per revolution |
| Error limits | Measuring step deviation x 3 |
| Duty cycle | ≤ 0.5 ± 5 % |
| Communication interface | Incremental |
| Communication Interface detail | TTL / HTL 1) |
| Number of signal channels | 6-channel |
| Programmable/configurable | ✔ |
| Parameterising data | DIP switch, selectable output |
| Output function | A and B output |
| Initialization time | < 5 ms 2) |
| Output frequency | + 60 kHz |
| Load current | ≤ 30 mA, per channel |
| Operating current | ≤ 120 mA (without load) |
| Power consumption | ≤ 1.25 W (without load) |
| DIP switch parametersPulses per revolution✔Output voltage✔Direction of rotation✔Configuration switches1800 PPR values, direction selection, TTL/HTL selectable | DIP switch parameters |
| DIP switch parameters | |
| Pulses per revolution | ✔ |
| Output voltage | ✔ |
| Direction of rotation | ✔ |
| Configuration switches | 1800 PPR values, direction selection, TTL/HTL selectable |
| Connection type | Male connector, M12, 4-pin, universal 1) |
| Supply voltage | 4.75 … 30 V |
| Reference signal, number | 1 |
| Reference signal, position | 180°, electric, gated with A |
| Reverse polarity protection | ✔ |
| Short-circuit protection of the outputs | ✔ |
| Mechanical design | Through hollow shaft |
| Shaft diameter | 12 mmFront clamp |
| Flange type / stator coupling | Without stator coupling, flange with 4 x M2,5 |
| Weight | 0.25 kg 1) |
| Shaft material | Stainless steel |
| Flange material | Aluminum |
| Housing material | Aluminum |
| Material, cable | PVC |
| Start up torque | 0.5 Ncm (+20 °C) |
| Operating torque | 0.4 Ncm (+20 °C) |
| Permissible movement static | ± 0.3 mm (radial)± 0.5 mm (axial) |
| Permissible movement dynamic | ± 0.1 mm (radial)± 0.2 mm (axial) |
| Operating speed | 1,500 min⁻¹ |
| Moment of inertia of the rotor | 50 gcm² |
| Bearing lifetime | 3.6 x 109 revolutions |
| Angular acceleration | ≤ 500,000 rad/s² |
| EMC | According to EN 61000-6-2 and EN 61000-6-3 |
| Enclosure rating | IP65 1) |
| Permissible relative humidity | 90 % (Condensation not permitted) |
| Operating temperature range | –30 °C … +90 °C |
| Storage temperature range | –40 °C … +75 °C |
| Resistance to shocks | 100 g (EN 60068-2-27) |
| Resistance to vibration | 30 g, 10 Hz … 2,000 Hz (EN 60068-2-6) |
| EU declaration of conformity | ✔ |
| UK declaration of conformity | ✔ |
| ACMA declaration of conformity | ✔ |
| China RoHS | ✔ |
| cULus certificate | ✔ |
| Information according to Art. 3 of Data Act (Regulation EU 2023/2854) | ✔ |
| ECLASS 5.0 | 27270501 |
| ECLASS 5.1.4 | 27270501 |
| ECLASS 6.0 | 27270590 |
| ECLASS 6.2 | 27270590 |
| ECLASS 7.0 | 27270501 |
| ECLASS 8.0 | 27270501 |
| ECLASS 8.1 | 27270501 |
| ECLASS 9.0 | 27270501 |
| ECLASS 10.0 | 27270501 |
| ECLASS 11.0 | 27270501 |
| ECLASS 12.0 | 27270501 |
| ETIM 5.0 | EC001486 |
| ETIM 6.0 | EC001486 |
| ETIM 7.0 | EC001486 |
| ETIM 8.0 | EC001486 |
| UNSPSC 16.0901 | 41112113 |
| header | value |
| Unit weight | 0.474 Kilograms |
| Net unit weight | 0.474 Kilograms |
| Unit volume | 5796.375 Cubic Centimetres (cm³) |
| Country of origin | United States |
| EAN | 4047084487330 |
Reviews
There are no reviews yet.