MAX48A-22A10EA0370 1131758 Linear encoders: MAX SICK

Description

MAX48A-22A10EA0370 1131758 Linear encoders: MAX SICK Products Motion control sensors Linear encoders > Motion control sensors > Linear encoders > MAX > MAX48A-22A10EA0370 CE|RCM|UKCA

Items supplied	Accessories not included with delivery, please order separately.
MTTFD (mean time to dangerous failure)	69 years (EN ISO 13849-1) 1)
Type	48 mm installation housing – IN cylinder mounting
Pressure pipe/End cap	10 mm / Flat
Connection type	Male connector, M12 type L (24×24 mm), 4-pin
Direction of connection	Axial
Measuring rangeMeasured valuesPositioningPosition (F.S.)0 mm … 370 mm 1)Null zone30 mmDamping zone36 mm	Measuring range
Measuring range
Measured values	Positioning
Position (F.S.)	0 mm … 370 mm 1)
Null zone	30 mm
Damping zone	36 mm
Operating conditionsFluid temperature–30 °C … +95 °C 2)Air humidity90 % (Condensation not permitted)Operating pressure PN400 barSupply voltage24 V DC (8 … 32 V DC)Switch-on time< 250 msSwitch-on currentTyp. 5.0 A / 50 µsMeasuring frequency (internal)2 msTransmission rate (cycle time)Steady	Operating conditions
Operating conditions
Fluid temperature	–30 °C … +95 °C 2)
Air humidity	90 % (Condensation not permitted)
Operating pressure PN	400 bar
Supply voltage	24 V DC (8 … 32 V DC)
Switch-on time	< 250 ms
Switch-on current	Typ. 5.0 A / 50 µs
Measuring frequency (internal)	2 ms
Transmission rate (cycle time)	Steady
AccuracyHysteresis± 0,1 mmRepeatabilityTyp. ± 0.2 mmLinearityTyp. ± 0.25 mm (measuring range 50 to 500 mm) 3)Typ. ± 0.04% F.S. (measuring range from 500 to 2,500 mm)	Accuracy
Accuracy
Hysteresis	± 0,1 mm
Repeatability	Typ. ± 0.2 mm
Linearity	Typ. ± 0.25 mm (measuring range 50 to 500 mm) 3)
Temperature driftWarming up phaseTyp. ≤ ± 0.25 mm (2 min)In the operational statusTyp. ± 0.25 mm (measuring range 50 to 500 mm) 3)Typ. ± 0.04% F.S. (measuring range from 500 to 2,500 mm)	Temperature drift
Temperature drift
Warming up phase	Typ. ≤ ± 0.25 mm (2 min)
In the operational status	Typ. ± 0.25 mm (measuring range 50 to 500 mm) 3)
Communication interface	Analog
Communication Interface detail	Current
Current output	4 mA … 20 mA
PIN assignment	1=n.c.; 2=V DC; 3=GND; 4=SIG
Electrical operationSupply voltage24 V DC (8 … 32 V DC)Residual ripple< 1% S-SPower consumption≤ 1.25 WCurrent consumption≤ 50 mALoad resistance100 Ω ≤ RL ≤ 500 Ω	Electrical operation
Electrical operation
Residual ripple	< 1% S-S
Power consumption	≤ 1.25 W
Current consumption	≤ 50 mA
Load resistance	100 Ω ≤ RL ≤ 500 Ω
Overvoltage protection during power-up (60 s)	≤ 36 V at all poles during power-up (60 s)≤ 48 V To GND during power-up (60 s)
Reverse polarity protection	≤ 36 V (at all poles) (ISO 16750-2)
Insulation resistance	Riso ≥ 10 MΩ, 60 s (ISO 16750-2)
Dielectric strength	500 V DC, 0 V DC (60 s) to housing (RISO ≥ 1 MΩ) (ISO 16750-2)
Short-circuit protection	VS – GND on housing
DimensionsHousing48 mm, 48f7 for IN cylinder mounting – cylinder bore hole 48H8Ø pressure pipe10 mmØ O-ring40.87 mm x 3.53 mmØ support ring42.6 mm x 48 mm x 1.4 mmM12 flangeM12 flange type L: DM 24×24 mm – hole pattern 17 mm (EN 61076-2-101)Wire length60 mm	Dimensions
Dimensions
Housing	IP67 (EN 60529)
Ø pressure pipe	10 mm
Ø O-ring	40.87 mm x 3.53 mm
Ø support ring	42.6 mm x 48 mm x 1.4 mm
M12 flange	Nickel-plated brass with O-ring (NBR)
Wire length	60 mm
MaterialHousingStainless steel 1.4305 (AISI 303)Pressure pipeStainless steel 1.4404, AISI 316LO-ringNBR 70Support ringPTFEM12 male connectorGlass fiber reinforced polyamide, nickel-/gold-plated brass contactsM12 flangeNickel-plated brass with O-ring (NBR)StrandsPVC	Material
Material
Pressure pipe	Stainless steel 1.4404, AISI 316L
O-ring	NBR 70
Support ring	PTFE
M12 male connector	IP69K (ISO 20653) 3)
Strands	PVC
EMCEU Directive 2014/30 / EU CE markingGeneric standardsEN 61000-6-2/61000-6-3Agricultural and forestry machineryEN ISO 14982Transient pulsesISO 7637-2/ISO 16750-2ESD (air and contact discharge)ISO 61000-4-2 / ISO 10605	EMC
EMC	EU Directive 2014/30 / EU CE marking
Generic standards	EN 61000-6-2/61000-6-3
Agricultural and forestry machinery	EN ISO 14982
Transient pulses	ISO 7637-2/ISO 16750-2
ESD (air and contact discharge)	ISO 61000-4-2 / ISO 10605
VibrationSine20 g (sine) / 55 … 2,000 Hz / 3×24 h (IEC 60068-2-6 Fc)Sine over noise18 g (r.m.s) / 10 … 2,000 Hz / 3×36 h (IEC 60068-2-80 Fi)Broadband noise (resonance peaks removed)20 g (r.m.s) / 10 … 2,000 Hz / 3×48 h (IEC 60068-2-64 Fh)	Vibration
Vibration
Sine	20 g (sine) / 55 … 2,000 Hz / 3×24 h (IEC 60068-2-6 Fc)
Sine over noise	18 g (r.m.s) / 10 … 2,000 Hz / 3×36 h (IEC 60068-2-80 Fi)
Broadband noise (resonance peaks removed)	20 g (r.m.s) / 10 … 2,000 Hz / 3×48 h (IEC 60068-2-64 Fh)
Pressure loadOperating pressure PN400 barOverload pressure Pmax = PN x 1.2480 barTest pressure Pstat = PN x 1.5600 bar	Pressure load
Pressure load
Overload pressure Pmax = PN x 1.2	480 bar
Test pressure Pstat = PN x 1.5	600 bar
Temperature and air humidityStorage–20 °C … +65 °C 1)Operation (electronics)–40 °C … +105 °C 2)Maximum air humidity90 % (Condensation not permitted)	Temperature and air humidity
Temperature and air humidity
Storage	–20 °C … +65 °C 1)
Operation (electronics)	–40 °C … +105 °C 2)
Maximum air humidity	90 % (Condensation not permitted)
Enclosure ratingHousingIP67 (EN 60529)M12 male connectorIP69K (ISO 20653) 3)	Enclosure rating
Enclosure rating
EU declaration of conformity	✔
UK declaration of conformity	✔
ACMA declaration of conformity	✔
Moroccan declaration of conformity	✔
China RoHS	✔
Information according to Art. 3 of Data Act (Regulation EU 2023/2854)	✔
ECLASS 5.0	27270705
ECLASS 5.1.4	27270705
ECLASS 6.0	27270705
ECLASS 6.2	27270705
ECLASS 7.0	27270705
ECLASS 8.0	27270705
ECLASS 8.1	27270705
ECLASS 9.0	27270705
ECLASS 10.0	27270705
ECLASS 11.0	27270705
ECLASS 12.0	27274304
ETIM 5.0	EC002544
ETIM 6.0	EC002544
ETIM 7.0	EC002544
ETIM 8.0	EC002544
UNSPSC 16.0901	41111613
header	value
Unit weight	0.099 Kilograms
Net unit weight	0.099 Kilograms
Country of origin	Germany