Hope530 G2.2T4B ( Hope 530 High Performance Speed Drive 5.5 A, 2.2 KW, 380V-440V With Internal Break )

Description

Description
(CE) Conformité Européenne	Declared to comply with all the European legislations
Warranty	18 months from factory discpatch
Rated voltage, frequency	3-phase: 380V, 50Hz/60Hz; 3-phase: 660V, 50Hz/60Hz
Allowable range	Voltage fluctuating range: -15%~10%; voltage tolerance: <3%; frequency: 47Hz~63Hz
Output voltage	Three-phase, 0V~input voltage, tolerance<5%
Output frequency range	VF: 0.00 – 650.00Hz; Vector: 0.00 – 200.00Hz
Overload capacity	150% of rated current for 60s, 180% of rated current 15s, 200% of rated current 2s
Frequency resolution	Digital setting: 0.01Hz; simulation setting:<2% of the maximum frequency
Output frequency accuracy	Analog setting: <±2% of the maximum frequency; digital setting: 0.01Hz
Analog input AI	2 channels AI: 0/4~20mA, 0-10V
Analog output AO	2 channels AO: 0/4~20mA, 0-10V
Digital input	5 digital inputs, NPN / PNP
Digital output	2 digital output, 2 relay output
PFI / PFO	1 channel pulse frequency input and output
Communication	Built-in RS485 interface with Modbus RTU, optional ModbusTCP, Profibus, Profinet
Motor control mode	VF, VF+PG, SVC, VC+PG
Run command channel	Operation panel setting, control terminal setting, communication setting
Frequency setting channel	Operation panel, communication, UP/DOWN regulated value, AI, PID, multi-step speed, PFI, logic
DC braking	Braking time: 0.0s~60.0s, braking current: 0.0%~100.0% of rated current
Acceleration & deceleration	Linear, S curve ACC/DEC
Jog	Jogging frequency range: 0.10Hz～50.00Hz
AVR	Automatic voltage regulation
Automatic carrier frequency	Automatically regulate carrier frequency according to load characteristic and environment temperature
Droop control	Suitable for multi-motor drive control
Multistep speed method	48 steps
Multi-modes PLC	8 sets PLC modes, max. 48 steps
Position control	Zero-speed position lock, position control
Logic unit	Comparator, logic unit, trigger, arithmetic unit,
Others	Tracking start, stall prevention, oscillation suppression, accurate dead zone compensation functions
Protection	Over-current, over-voltage, under-voltage, phase loss, output interphase short circuit, overheat, motor overload, external failure, lost connection of analog input, stall prevention, etc.
Altitude	With altitude below 1000m, derate >1000m
Operating	-10~+40℃ / 20~90%RH, without condensation water drop
Storage temperature	-20~+60℃
Vibration	<5.9m/s2 (0.6g)
Degree of protection	IP20
Cooling mode	Force-air cooling