Product Overview

The SICK TMM22E-PLH060S55 is a robust dual-axis inclination sensor (inclinometer) from the TMS/TMM22 family, designed for industrial motion control applications. Built on durable MEMS (Micro-Electro-Mechanical Systems) technology, it delivers precision tilt measurements up to ± 60° with rock-solid reliability. Ideal for tasks like leveling, orientation sensing, and tracking, especially in demanding environments. SICKmotionworld.com

Key Technical Specifications

• Measurement & Accuracy

  • Axes: 2 (X and Y)

  • Range: ± 60°

  • Resolution: ≤ 0.015°; Static Accuracy: typ. ± 0.25°, max ± 0.6°

  • Repeatability: 30 mV (2-dimensional)

  • Cross-Sensitivity: typ. ± 0.5°, max ± 0.9°

  • Temperature Drift: zero point shift ± 0.03°/K

  • Bandwidth: 10 Hz; Sampling Rate: 400 Hz SICK

• Output & Signal

  • Analog Interface: Voltage, 0–10 V output

  • Load Resistance: ≥ 2 kΩ

  • Status Feedback: Dual LEDs (green/red); outputs drop to 0 V in error state

  • Initialization Time: 250 ms SICK

• Robust Electrical Design

  • Supply Voltage: 12–30 V DC

  • Current Consumption: < 30 mA (at 24 V)

  • Protections: Reverse polarity and short-circuit safeguarded outputs SICK

• Mechanical & Environmental

  • Dimensions: 38.8 × 30 × 10.4 mm; Weight: ~60 g

  • Housing: Glass-fiber reinforced PA12 plastic

  • Ingress Ratings: IP66, IP67, IP68, and IP69K—sealed electronics ideal for harsh, wet, and dusty environments

  • Shock/Vibration Resistance: 100 g (6 ms), 10 g (10 Hz–2 kHz)

  • Operating Temperature: –40 °C to +80 °C; Storage: –40 °C to +85 °C SICK

System Integration & Installation

• Connectivity

  • Equipped with a 0.3 m cable and a straight 5-pin M12 female connector (A-coded) for easy wiring. SICK

• Safety & Reliability

  • MTTFd: 961 years per EN ISO 13849-1—while not a safety-rated component under Machinery Directive, it delivers high reliability. SICK

• Versatile Deployment
  Its compact form and rugged ratings make it ideal for outdoor systems like solar trackers, mobile machinery, vertical storage, and automated guided vehicles (AGVs). motionworld.com

Engineering Insight

• High-Precision through MEMS
  MEMS-based sensing ensures long-term accuracy (± 0.1°), minimal wear, and resilience against environmental stress.

• Dual-Axis Simplicity
  Gains X and Y tilt simultaneously, streamlining data acquisition in demanding applications.

• Durable & Serviceable Design
  Rated to IP69K and mechanically robust, it withstands pressure washing, UV exposure, and mechanical strain—ideal for on-field deployment.

• Fast Diagnostics
  LED indicators and low 0 V error output allow for straightforward fault detection and maintenance.

• Plug-and-Play Integration
  Linear analog output and M12 connector enable quick wiring and compatibility with existing analog control systems.

Suggested Product Page Description

TMM22E-PLH060S55 Dual-Axis Inclination Sensor (± 60°, 0–10 V Output)
Compact yet powerful, this M12-ready inclinometer delivers dual-axis tilt sensing with ≤ 0.015° resolution and high accuracy. Ruggedized for tough environments (IP69K) and resilient to shock, vibration, and UV exposure, it’s ideal for precision control in solar tracking, mobile equipment, AGVs, and vertical storage systems. Fast commissioning, intuitive diagnostics, and MEMS reliability make it a smart choice for high-confidence automation.

Key Highlights

• ± 60° dual-axis measurement, high resolution and accuracy

• Analog 0–10 V interface with LED status feedback

• Rugged IP69K housing; simple M12 connector setup

• Rapid 400 Hz sampling; 10 Hz bandwidth—suited for dynamic control

• Ultra-reliable with robust environmental tolerance